Plastic Finishes
Post-processing treatments for your 3D printed parts.
All uploads are encrypted end-to-end
Top Black™ UV Resistant finish line represents the best aesthetic and technical solution for items manufactured by Additive Manufacturing. Weerg's new dye also provides longer-lasting protection against UV rays, preventing the color from fading over time.
Available for: Nylon PA12, Nylon PA11, Nylon PA12 GB
All semi-matt varnishes can be applied to HP MJF parts and are created by spraying an industrial two-component product in two or more coats. The paint coverage is partially uniform and increases in thickness by about 100 microns. However, the porosity of the material can be visible, especially on the non-aesthetic side, being a characteristic feature of the printing technology itself.
Parts with Soft Touch Black finish are coated with a combination of products so that the surface is soft to the touch and matte. To achieve this effect, this varnish adds a uniform material thickness of about 100 microns to your file.
Available for: Nylon PA12, Nylon PA11, Nylon PA12 GB, Polypropylene
Semi-gloss varnishes can be applied to parts produced in HP MJF and are created by spraying an industrial two-component product in two or more coats. The coverage is partially uniform and increases in thickness by about 100 microns. However, the porosity of the material can be visible, especially on the non-aesthetic side, being a characteristic feature of the printing technology itself.
Available for: Nylon PA12, Nylon PA11, Nylon PA12 GB, Polypropylene
Metallic varnishes can be applied to HP MJF components and are created by spraying an industrial two-component product in two or more coats. The coating is partially uniform and increases in thickness by about 100 microns. However, the porosity of the material can be visible, especially on the non-aesthetic side, as it is a characteristic feature of the printing technology.
Available for: Nylon PA12, Nylon PA11, Nylon PA12 GB, Polypropylene
PEEK manufactured parts have a crystalline structure in an amorphous state once removed from the printer's construction surface. They can undergo an annealing heat treatment in a thermostatic oven in which, through a controlled cycle, the material is given time to crystallize and create an organized semi-crystalline structure. This treatment markedly improves the mechanical and heat-resistant properties of the material.
Available for: PEEK Classic
QUOTE IN 1 SECOND WITHOUT COMMITMENT
Upload your 3D file to get one step closer to manufacturing your parts.
free instant quote
.jpg?width=700&height=400&name=gallery_rame-(1).jpg)
