Skip to content
Instant quote

Materials for 3D printing

Materials for applications without constraints of geometric complexity and shape

3D printing or additive manufacturing has revolutionized the way of thinking and carrying out design because it frees us from the constraints and limitations of traditional manufacturing technologies. Over the years, the material portfolio has grown considerably, offering a varied range of polymers that are suitable for a range of applications. This was possible thanks to the parallel development of different production technologies, each with its own characteristics. The most common and interesting materials, such as PA12 nylon, are facilitating the transition of the use of these technologies from conceptual and functional prototyping tools to real production technology capable of meeting all the requirements of final products produced in runs of thousands of components.

Show all

Nylons available

Nylon PA 12

Polyamide 12 - Nylon 12

  • 3D MJF Multi Jet Fusion

Nylon PA 12 (Polyamide 12) guarantees good mechanical properties along all axes as well as resistance to chemical agents and moisture ...

Nylon PA 11

Polyamide 11 - Nylon 11

  • 3D MJF Multi Jet Fusion

Nylon PA 11 (Polyamide 11) guarantees good mechanical properties on all axes as well as resistance to chemical agents and moisture ...

Nylon PA 12 + Carbon Fiber

Nylon 12 CF - PA12CF - Nylon 12 Carbon Fibre

  • 3D FDM Fused deposition modeling

Nylon PA 12 CF is a composite material, made by reinforcing the Nylon base with Carbon Fibre. The result is a stable material, with high ...

Nylon PA 6 + Carbon Fiber

Nylon 6 CF - PA6CF - Nylon 6 Carbon Fibre

  • 3D FDM Fused deposition modeling

PA 6 CF Nylon is a composite material, made by reinforcing the Nylon base with Carbon Fibre. The result is a stable material, with high ...

Nylon PA12 40% GB

Nylon PA 12 Glass Beads - Nylon PA 12 40% Glass Beads

  • 3D MJF Multi Jet Fusion

Nylon PA 12 40%GF (Polyamide 12) guarantees good mechanical properties on all axes as well as resistance to wear, chemicals and moisture ...

Resins available

ABS-like resin

Draft Resin - Grey Resin

  • 3D MSLA Stereolithography

ABS-like resin tracks ABS performance but is characterized by increased stiffness and hardness. It allows you to achieve a high degree of ...

Clear Translucent Resin

Translucent Resin - Translucent Resin

  • 3D MSLA Stereolithography

Clear Resin is made after processing with a Translucent finish or frost effect, which guarantees a pleasant and homogeneous aesthetic ...

High Temp Resin

High Temperature Resin

  • 3D MSLA Stereolithography

The High Temp Resin (for high temperatures), with its HDT 0.45MPa of 190°C, is the most thermally efficient resin at the thermal level ...

Tough resin

Heavy duty resin

  • 3D MSLA Stereolithography

Tough resin (or resistant) boasts excellent resilience, its mechanical properties include elasticity and the ability to flex without ...

Polypropylene available

Polypropylene PP

PP

  • 3D MJF Multi Jet Fusion

Polypropylene (PP) has always been used in the manufacturing industry for the mix of mechanical properties with good elasticity and low ...

Peeks available

PEEK

Polyether ether ketone

  • 3D FDM Fused deposition modeling

PEEK is a polymer that can be both amorphous and semi-crystalline. The latter is characterized by greater mechanical resistance to the ...

PEEK CF

Peek Carbon Fibre - Peek Carbon

  • 3D FDM Fused deposition modeling

PEEK CF is a carbon fibre reinforced composite material that makes it high performance. Compared to PEEK, it has extraordinary ...

ABS available

ABS food

ABS Food

  • 3D FDM Fused deposition modeling

This specific ABS (acrylonitrile-butadiene-styrene) has been made to be compatible for all uses in food contact contexts. Like other ABSs, ...

ABS medical

Medical ABS

  • 3D FDM Fused deposition modeling

This specific ABS (acrylonitrile-butadiene-styrene) has been made to be compatible for all uses in medical and health settings. Like other ...

Gallery

Application Sectors

Automotive sector
Architecture sector
Dental Sector
Industrial sector
Medical sector
DIY sector
Food sector

Production technologies

Multi Jet Fusion
Learn more about technology
Multi Jet Fusion (MJF) technology is a 3D dust-bed printing system developed by HP. Unlike SLS technology, this technology does not require a laser to sinter the material. A powder bed is deposited inside the print build and heated to a fixed temperature. A melting agent is deposited on these powders where the material will have to melt and a ...
Fused deposition modeling
Learn more about technology
Fused deposition modelling or FDM creates the components layer by layer by depositing discrete material via a 0.40 mm diameter nozzle. The print head moves in XY and deposits a single layer. Subsequently the printing plane, the Z axis, moves downwards to allow the deposition of the next layer. The ...
Mask Stereolithography
Learn more about technology
Masked Stereolithography (MSLA) is a 3D printing or additive manufacturing process that uses UV-sensitive liquid resins as a material. These UV rays are used to impress a selected area (through a mask) of the print area that will then solidify. Level after level, the desired object will be created, from the bottom up. The ...

Leggi cosa dicono di noi

Score 4.81 / 5

Based on 281 reviews

trusted-shop