Skip to content
FREE INSTANT QUOTE

New MJF Nylon PA12 White Premiere by Weerg

Weerg staff

13 minutes reading time

The wait is finally over and we can tell you about the new project between Weerg e HP: Nylon PA12 White produced by Multi Jet Fusion technology, which combines the exceptional Nylon 12 mechanical properties with the versatility of white color.

Let's explore it together in this article and we'll also tell you how you can receive it now in preview.

 

The new Nylon PA12 White

Nylon PA12 White realizzato con Multi Jet Fusion MJF presso Weerg-1

HP Multi Jet Fusion technology has been totally revolutionary for the manufacturing industry. Indeed, this production process has made it possible to overcome many of the limitations of traditional manufacturing (such as injection moulding), by allowing production to begin without start-up costs and in a short lead time.

Nylon PA12 has very good mechanical and chemical properties, comparable to most plastics used in traditional manufacturing. Furthermore, its versatility in applications and productions have made it a recommended choice for many projects, from prototyping to long production runs.

The limitation of this material, however, resulted from its post-printing colouring: Nylon PA12 is grey on the outside, while on the inside, the melted powders are characterized by black colour. This characteristic limits its coloured applications, as it could only be dyed black or painted. Varnishing, however, restricts the mechanical applications by adding a few microns to the total thickness of the component or by covering minute details.

For a long time, some of our customers have felt the need for more variety in the colouring of Nylon PA12. And finally we have it. Over the past few months, HP has worked non-stop to develop a white version of PA12 that, while maintaining the same mechanical behaviour for which it has been appreciated, could also be dyed if necessary.

Nylon PA12 White is now available as an EMEA premiere by Weerg: and you can try it only for €1 for a limited time.

 

Componente realizzato in Nylon PA12 White con Multi Jet Fusion

 

The new HP Multi Jet Fusion 5420W

For some weeks now, the new Multi Jet Fusion 5420W, which had been presented on 14th November 2022 at FormNext in Frankfurt and which are needed to print Nylon PA12 White, have been arriving in Weerg. Weerg R&D department has been working non-stop to optimize the production cycle and ensure mass production of the new material in order to launch it onto the market.

The first tests that were conducted on this material have proven phenomenal: the mechanical properties are equal to common PA12 and isotropic in all axes. In addition, the material maintains tolerance to high temperatures. This allows it to be safely used for all projects where PA12 Grey was used. Moreover, we have started the first beta tests on the dyeing of the material, with very satisfying results: you will even be able to experience them in the coming months.

The new 5420W machines allow a further step forward for 3D Printing: thanks to the production of both white and coloured parts, the gap with traditional technologies is overcome. With the same mechanical properties, 3D printing allows us to remove start-up costs, such as the production of moulds, and to produce functional prototypes and entire runs with the same process. In addition, the optimized production cycle allows us a constant flow of production with the possibility of ordering and receiving components within 2 days.

 

Componente realizzato in Nylon PA12 White con Multi Jet Fusion

Try the new Nylon PA12 White for only 1€

As always, Weerg wants to receive your feedback by giving you the chance to be part of this great novelty. Each user can order their own sample of Nylon PA12 White for only €1, while stocks last.

Ordering is simple: just upload your file to the weerg.com Quote Tool and select Nylon PA12 White as material. If the file volume is less than 100cm3, you will automatically see the promotional price of 1€ applied and can proceed with the order.

Your feedback is essential: we are already working on new material developments (a small hint will be the wide range of dyes), but we definitely want to know your opinion. As this is a beta release, there is still very little material available on the market, which is why you can only order a sample of maximum 100cm3. If your feedback is positive, HP will certainly make more material available in the coming weeks.

Let us know what you think by sending an email to info@weerg.com.

 

Upload your 3D file here to order Nylon PA12 White for 1€

 

Drag and drop your CAD files here in .stl, .stp, .step, .zip formats (max. 150Mb)

 

 

Componente realizzato in Nylon PA12 White con Multi Jet Fusion

 

Promotion terms and conditions

The promotion is related to the beta release of Nylon PA12 White made by Multi Jet Fusion technology. Each customer can order 1 unit of a file of their choice at a cost of only 1€. The volume of the file must not exceed 100cm3. The promotion is valid while stocks last and will expire on 31.12.2022.

As this is a beta release of the material, it will not be possible to complain about inaccuracies, printing defects, breakages or malfunctioning of parts. Any feedback received on the product component will be helpful and appreciated: please send your feedback to info@weerg.com.

Data courtesy by Odo Fioravanti for Maison 203

Related articles